Can-Am Maverick X3 Tail Light Whip Power Harness Adapter Splice Pigtail Jumper

Can-Am Maverick X3 Tail Light Whip Power Harness Adapter Splice Pigtail Jumper

Can-Am Maverick X3 Tail Light Whip Power Harness Adapter Splice Pigtail Jumper  EASY TO INSTALL- Unplug the stock harness at either TAIL LIGHT and plug our harness inline and run the wires to your LED whip light or whatever 12v...

$25.00
  • Category: DIY Supplies, Superior Motorsports Products, Whips and Accessories
Can-Am Maverick X3 Tail Light Whip Power Harness Adapter Splice Pigtail Jumper 

  • EASY TO INSTALL- Unplug the stock harness at either TAIL LIGHT and plug our harness inline and run the wires to your LED whip light or whatever 12v accessory you'd like to power. See photo for wiring descriptions.

  • FITS: 2012-2020 Can Am Maverick X3, Max, X-DS, etc. DOES NOT FIT: 2016 & Newer Can-Am Maverick 1000R X-RS Turbo. Please verify your tail light has the matching 3 wire plug on it as shown in our images to verify fitment of your machine

  • NO CUTTING REQUIRED- Plug and Play into your existing harness. Use the included splices to hook up the wires to your LED whip or other 12v accessory.

  • 3 WIRE OUTPUT- Red to running light, Yellow to brake light, Black to ground. Red will provide 12v any time the key is on. Yellow will only provide 12v when the brake pedal is pressed.

  • WIRING- Use the red wire to power accessories such as whips and license plate lights. Use the yellow wire to power additional brake lights. Use the black ground for all applications.
THIS MUST BE PLUGGED IN DIRECTLY AT THE TAIL LIGHT. IT WILL NOT WORK PLUGGED IN ANYWHERE ELSE. You can use this at either tail light and can use two per vehicle if you want to power a whip on both sides. This listing is only for one but we also sell them in 2-packs. WIRING INSTRUCTIONS: The red and yellow wires are both power wires. You only need to use ONE of them. You can cut off the unused one and wrap the end in electrical tape. Red will provide 12v any time the key is on. Yellow will only provide 12v when the brake pedal is pressed. Use the red wire to power accessories such as whips and license plate lights. Use the yellow wire to power additional brake lights. Use the black ground for all applications. THIS MUST BE PLUGGED IN DIRECTLY AT THE TAIL LIGHT. IT WILL NOT WORK PLUGGED IN ANYWHERE ELSE.